GMC Acadia Limited Tow Bar Wiring Installation And Review Videos

Roadmaster Tow Bar Wiring Kit Installation - 2017 GMC Acadia Limited- Video

Today, in our 2017 GMC Acadia, we're going to be installing Roadmasters diode wiring kit. If the tow bar you have came with a coiled cable, or you already have one, you can get Roadmasters universal high power diode wiring kit, which comes with the diodes and the wiring, but does not come with the six pole connector or the coiled cable. As far as your complete flat tow set up, you're going to need your base plate, your wiring kit, you're braking system, and your tow bars. And in the event your tow bar doesn't come with safety cables, you'll need to get some of those as well.This diode wiring kit is going to allow our motor home's turn, stop, and tail lamp signals to be transferred from the motor home to our vehicle, and our lights illuminate appropriately to display those signals behind us. What's great about the diodes is that it isolates the circuits that's on your vehicle from the ones coming from your motor home, so you don't have to worry about any back feeding causing damage to your vehicle.To install your diodes and your wiring, you are going to need to remove your tail lights on both the driver and passenger side. They come out fairly easily. more

2/13/2019 10:47:42 AM

Roadmaster Diode 7 to 6 Wire Coil Kit Installation - 2017 GMC Acadia Limited- Video

Today on our 2017 GMC Acadia we're going to be installing road masters dialed wiring kit. If the tow bar you have came with the coiled cable or you already have one, you can get Roadmaster's Universal Hy-power Diode Wiring kit, which comes with the diodes and the wiring. It does not come with the six foil connector or the coiled cable.As far as your complete flat tow setup, you're going to need your base plate, your wiring kit, your braking system, and your tow bars. And in the event your tow bar doesn't come with safety cables, you'll need to get some of those as well.This diode wiring kit is going to allow our motor homes, turn, stop and tail lamp signal to be transferred from the motor home to our vehicle and our lights illuminate appropriately to display those signals behind us.What's great about the diodes is that it isolates the circuits that's on your vehicle from the ones coming from your motor home so you don't have to worry about any back feeding causing damage to your vehicle.To install your diodes and your wiring, you are going to need to remove your taillights on both the driver and the passenger side. They come out fairly easily, you'll need to open your lift gate, there'll be two little plastic covers, just pop those out of your taillight assembly with a flat bladed screw driver. Then you can remove both the bolts that are located there with a 7 millimeter socket. more

2/13/2019 10:42:13 AM